Installation guide

MEDIA-MANAGER-CONFIG CONFIGURATION ELEMENTS A-M
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 171
Values enabled | disabled
latching—Enable or disable the Net-Net SBC obtaining the source of the first
packet received for a dynamic flow. This parameter is only applicable to dynamic
flows. If packet source is unresolved, but Net-Net SBC expects a packet, it will use
newly arrived packet’s source address if latching is enabled. All subsequent packets
for the dynamic flow must come from the “latched” source address; otherwise, the
packets are dropped.
Default enabled
Values enabled | disabled
flow-time-limit—Enter the total time limit in seconds for the flow. The Net-Net
SBC notifies the signaling application when this time limit is exceeded. This field is
only applicable to dynamic flows. A value of 0 seconds disables this function and
allows the flow to continue indefinitely.
Default 86400
Values Min: 0 / Max: 999999999
initial-guard-timer—Enter the time in seconds allowed to elapse before first
packet of a flow arrives. If first packet does not arrive within this time limit, Net-Net
SBC notifies the signaling application. This field is only applicable to dynamic flows.
A value of 0 seconds indicates that no flow guard processing is required for the flow
and disables this function.
Default 300
Values Min: 0 / Max: 999999999
subsq-guard-timer—Enter the maximum time in seconds allowed to elapse
between packets in a flow. The Net-Net SBC notifies the signaling application if this
timer is exceeded. This field is only applicable to dynamic flows. A field value of
zero seconds means that no flow guard processing is required for the flow and
disables this function.
Default 300
Values Min: 0 / Max: 999999999
tcp-flow-time-limit—Enter the maximum time in seconds that a media-over-TCP
flow can last
Default 86400
Values Min: 0 / Max: 999999999
tcp-initial-guard-timer—Enter the maximum time in seconds allowed to elapse
between the initial SYN packet and the next packet in a media-over-TCP flow
Default 300
Values Min: 0 / Max: 999999999
tcp-subsq-guard-timer—Enter the maximum time in seconds allowed to elapse
between all subsequent sequential media-over-TCP packets
Default 300