Installation guide

172 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS A-M MEDIA-MANAGER-CONFIG
Values Min: 0 / Max: 999999999
tcp-number-of-ports-per-flow—Enter the number of ports, inclusive of the server
port, to use for media over TCP. The total number of supported flows is this value
minus one.
Default 2
Values Min: 2 / Max: 5
hnt-rtcp—Enable or disable support of RTCP when the Net-Net SBC performs
HNT. If disabled, the Net-Net SBC will only do RTP for endpoints behind a NAT. If
enabled, the Net-Net SBC will add a separate CAM entry for the RTCP flow so that
it can send the RTCP back to the endpoint behind the NAT.
Default disabled
Values enabled | disabled
algd-log-level—Select the log level for the MGCP process
Default notice
Values • emergency
•critical
•major
• minor
•warning
•notice
•info
•trace
•debug
• detail
mbcd-log-level—Select the log level for the MBCD process
Default notice
Values • notice
•emergency
•critical
•major
• minor
•warning
•notice
•info
•trace
•debug
• detail
red-flow-port—Enter the number of the port for checkpointing media flows
associated with the HA interface. Setting the red-flow-port value to 0 disables
media flow HA.
Default 1985
Values Min: 1025 / Max: 65535
Notes This parameter is not RTC supported.