Installation guide

MEDIA-PROFILE CONFIGURATION ELEMENTS A-M
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 177
Path tos-settings is a subelement under the media-policy element. The full path from
the topmost ACLI prompt is: configure terminal > media-manager > media-
policy>tos-settings.
Release First appearance: 1.2.1
RTC Status Supported
Notes This configuration element sets the Packet Marking for Media features and defines
an individual type or class of service for the Net-Net SBC. Media policies can be
chosen on a per-realm basis.
This is a multiple instance configuration element.
media-profile
Syntax media-profile <name | media-type | payload-type | transport |
req-bandwidth | frames-per-packet | parameters | average-rate-
limit | peak-rate-limit | max-burst-size | sdp-rate-limit-
headroom | sdp-bandwidth | police-rate | subname | select | no |
show | done | exit>
Parameters name—Enter the encoding name used in the SDP rtpmap attribute. This is a
required field. No two media-profile elements can have the same name field value.
media-type—Select the type of media used in SDP m lines
Values • audio
• video
• application
•data
•image
•text
payload-type—Enter the format in SDP m lines. No payload type number is
assigned for newer, dynamic codecs. For RTP/AVP media-profile elements, this
field should only be configured when there is a standard payload type number that
corresponds to the encoding name. Otherwise, this field should be left blank. This
field is used by the system to determine the encoding type when the SDP included
with a session identifies the standard payload type on the m line, but does not
include an a-rtpmap entry.
transport—Select the type of transport protocol used in the SDP rtpmap attribute
Default RTP/AVP
Values UDP | RTP/AVP
req-bandwidth—Enter the total bandwidth in kilobits that the media requires
Default 0
Values Min: 0 / Max: 2
32
-1