Installation guide

180 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS A-M MGCP-CONFIG
mgcp-config
The mgcp-config element provides ALG functionality for MGCP messages
between media gateways and media gateway controllers.
Syntax mgcp-config <private-realm | private-address | private-port |
public-realm | public-ca-host | public-ca-address | public-ca-
port | public-gw-host | public-gw-address | public-gw-port |
second-public-gw-port | alg-port | mode | divisor | unit-prefix |
audit-interval | nat-traversal | dns-authentication | dns-
translation | ca-redundancy | ca-ping-method | ca-ping-interval |
rsip-failures | ca-failover-ip-addresses | options | port-map-
start | port-map-end | select | no | show | done | exit>
Parameters private-realm—Enter the private realm (location of the media gateways). This is a
required field. This private-realm field value must correspond to a valid identifier
field entry in a realm-config.
private-address—Enter the IP address on the media interface in the private realm
that the media gateways use as their call agent or softswitch IP address. This is a
required field.
private-port—Enter the port of IP address on the media interface in the private
realm that call agent or softswitch use
Default 2727
Values Min: 1025 / Max: 65535
public-realm—Enter the public realm of the call agent or softswitch. This is a
required field. This public-realm field value corresponds to a valid identifier field
entry in a realm-config that has already been configured.
public-ca-host—Enter the hostname for the public CA
public-ca-address—Enter the public IP address of call agent or softswitch. This is a
required field. Entries in this field must follow the IP Address format.
public-ca-port—Enter the public UDP Port of call agent or softswitch
Default 2727
Values Min: 1025 / Max: 65535
public-gw-host—Enter the FQDN to use in the endpoint MGCP messages on the
public side of the Net-Net SBC. If this field is left empty, the host part of the
endpoint name will be the public gateway IP address (i.e., the public-gw-address
field value).
public-gw-address—Enter the IP address on the media interface in the public
realm. This field value is the media gateway address that the Net-Net SBC uses to
communicate with the call agent or softswitch. This is a required parameter. If this
parameter is entered with a subnet mask in slash notation, 1:1 gateway mapping is
enabled.