Installation guide

200 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z REALM-CONFIG
average-rate-limit—Enter the average data rate in bits per second for host path
traffic from a trusted source
Default 0 (disabled)
Values Min: 0 / Max: 4294967295
access-control-trust-level—Select a trust level for the host within the realm
Default none
Values • high—Hosts always remains trusted
• medium—Hosts belonging to this realm can get promoted to trusted,
but can only get demoted to untrusted. Hosts will never be put in
black-list.
• low—Hosts can be promoted to trusted list or can get demoted to
untrusted list
• none—Hosts will always remain untrusted. Will never be promoted to
trusted list or will never get demoted to untrusted list
invalid-signal-threshold—Enter the acceptable invalid signaling message rate
falling within a tolerance window
Default 0
Values Min: 0 / Max: 4294967295
maximum-signal-threshold—Enter the maximum number of signaling messages
allowed within the tolerance window
Default 0 (disabled)
Values Min: 0 / Max: 4294967295
pai-strip—Enable or disable P-Asserted-Identity headers being stripped from SIP
messages as they exit the Net-Net SBC. The PAI header stripping function is
dependent on this parameter and the trust-me parameter.
Default disabled
Values enabled | disabled
deny-period—Enter the length of time an entry is posted in the deny list
Default 30
Values Min: 0 / Max: 4294967295
symmetric-latching—Enable or disable symmetric latching between endpoints for
RTP traffic
Default disabled
Values enabled | disabled
trunk-context—Enter the default trunk context for this realm
bw-cac-non-mm—Set this parameter to enabled to turn on bandwidth CAC for
media release
Default disabled