Installation guide

REALM-CONFIG CONFIGURATION ELEMENTS N-Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 201
Values enabled | disabled
user-cac-mode—Set this parameter to the per user CAC mode that you want to use
Default none
Values • none—No user CAC for users in this realm
• AOR—User CAC per AOR
• IP—User CAC per IP
user-cac-bandwidth—Enter the maximum bandwidth per user for dynamic flows
to and from the user. By leaving this parameter set to
0 (default), there is unlimited
bandwidth and the per user CAC feature is disabled for constraint of bandwidth.
Default 0
Values Min: 0 / Max: 999999999
user-cac-sessions—Enter the maximum number of sessions per user for dynamic
flows to and from the user. Leaving this parameter set to
0 (default), there is
unlimited sessions and the CAC feature is disabled for constraint on sessions.
Default 0
Values Min: 0 / Max: 999999999
monthly-minutes—Enter the monthly minutes allowed
Default 0
Values Min: 0 / Max: 71582788
net-management-control—Enable or disable network management controls for
this realm
Default disabled
Values enabled | disabled
delay-media-update—Enable or disable media update delay
Default disabled
Values enabled | disabled
refer-call-transfer—Enable or disable the refer call transfer feature for this realm
Default disabled
Values enabled | disabled
codec-policy—Select the codec policy you want to use for this realm
codec-manip-in-realm—Enable or disable codec policy in this realm
Default disabled
Values enabled | disabled
generate-udp-checksum—Enable or disable the realm to generate a UDP
checksum for RTP/RTCP packets.
Default disabled
Values enabled | disabled
enforcement-profile—Enter the name of the enforcement profile (SIP allowed
methods).