Installation guide

REALM-GROUP CONFIGURATION ELEMENTS N-Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 203
Values enabled | disabled
stun-server-ip—Enter the IP address for the primary STUN server port
Default 0.0.0.0
stun-server-port—Enter the port to use with the stun-server-ip for primary STUN
server port
Default 3478
Values Min. 1025/Max. 65535
stun-changed-ip—Enter the IP address for the CHANGED-ADDRESS attribute in
Binding Requests received on the primary STUN server port; must be different from
than the one defined for the stun-server-ip
Default 0.0.0.0
stun-changed-port—Enter the port combination to define the CHANGED-
ADDRESS attribute in Binding Requests received on the primary STUN server port
Default 3479
Values Min. 1025/Max. 65535
Path realm-config is an element under the media-manager path. The full path from the
topmost ACLI prompt is: configure terminal > media-manager > realm-config.
Release First appearance: 1.0 / Most recent update: S-C6.1.0
RTC Status Supported
Notes This is a multiple instance configuration subelement.
realm-group
The realm-group configuration element allows you to configure realm groups.
Realm groups are sets of source and destination realms that allow early media to
flow in the direction you configure.
Syntax realm-group <name | source-realm | destination-realm | early-
media-allow-direction | state | select | no | show | done | exit>
name—Enter the name of this realm group
source-realm—Enter the list of one or more global/SIP realms that you want to
designate as source realms for the purpose of blocking early media; this is the realm
identifier value for the realms you want on the list. To enter more than one realm in
this list, list all items separated by a comma and enclose the entire entry in quotation
marks.
destination-realm—Enter the list of one or more global/SIP realms that you want
to designate as destination realms for the purpose of blocking early media; this is the
realm identifier value for the realms you want on the list. To enter more than one
realm in the list, list all items separated by a comma and enclose the entire entry in
quotation marks.