Installation guide

204 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z REDUNDANCY
early-media-allow-direction—Set the direction for which early media is allowed
for this realm group.
Default both
Values • none—Turns off the feature for this realm group by blocking
early media
• reverse—Allows early media to flow from called to caller
• both—Allows early media to flow to/from called and caller
state—Enable or disable this realm group
Default disabled
Values enabled | disabled
Path realm-group is an element of the media-manager path. The full path from the
topmost ACLI prompt is: configure terminal > media-manager > realm-group.
Release First appearance: 4.1.4
RTC Status Supported
redundancy
The redundancy element establishes HA parameters for a Net-Net SBC that
participates in an HA architecture.
Syntax redundancy <state | log-level | health-threshold | emergency-
threshold | port | advertisement-time | percent-drift | initial-
time | becoming-standby-time | becoming-active-time | cfg-port |
cfg-max-trans | cfg-sync-start-time | cfg-sync-comp-time |
gateway-heartbeat-interval | gateway-heartbeat-retry | gateway-
heartbeat-timeout | gateway-heartbeat-health | media-if-
peercheck-time | peers | select | no | show | done | exit>
Parameters state—Enable or disable HA for the Net-Net SBC
Default enabled
Values enabled | disabled
Notes This parameter is not RTC supported.
log-level—Select the starting log level for the HA process. This value supersedes
the value configured in the process-log-level field in the system-config element for
the HA process.
Default info
Values • emergency
•critical
•major
• minor
•warning
•notice
•info
•trace
•debug