Installation guide

210 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z RPH-PROFILE
RTC Status Supported
rph-profile
The rph-profile contains information about how the Net-Net SBC should act on the
namespace(s) present in Resource-Priority headers.
Syntax rph-profile <name | r-values | media-policy | call-treatment |
select | no | show | done | exit>
Parameters name—Enter the name of this RPH profile; this is the value used when applying
this RPH profile to an NMC rule.
Default None
r-value—Enter a list of one or more r-values used for matching; WPS values must
be entered before ETS values.
Default None
media-policy—Enter the name of the media-policy to apply; overrides media
policies set for realms when there is an ETS call.
Default None
call-treatment—Select the call treatment method for a non-ETS call that contains
RPH matching this profile.
Default accept
Values accept | reject | priority
Path rph-profile is an element under the session-router path. The full path from the
topmost ACLI prompt is: configure terminal > session-router> rph-profile.
Release First appearance: 5.1
RTC Status Supported