Installation guide

218 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SESSION-AGENT
Default 0
Values Min: 0 / Max: 999999999
max-outbound-sustain-rate—Enter the maximum outbound sustain rate in
INVITEs per second
Default 0
Values Min: 0 / Max: 999999999
codec-policy—Enter the codec policy you want to apply to this session agent
enforcement-profile—Enter the enforcement policy set of allowed SIP methods
you want to use for this session agent
Default None
Values Name of a valid enforcement-profile element
refer-call-transfer—Enable or disable the refer call transfer feature for this session
agent
Default disabled
Values enabled | disabled
reuse-connections—Enter the SIP TCP connection reuse mode.
Default tcp
Values tcp | sctp | none
tcp-keepalive—Enable or disable standard keepalive probes to determine whether
or not connectivity with a remote peer is lost.
Default none
Values none | enabled | disabled
tcp-reconn-interval—Set the amount of time in seconds before retrying a TCP
connection.
Default 0
Values 0, 2-300
register-burst-window—Enter the window size in seconds for the maximum
number of allowable SIP registrations.
Default 0
Values Min: 0 / Max: 999999999
rate-constraints—Access the rate-constraints subelement
max-register-burst-rate—Enter the maximum number of new registrations you
want this session agent to accept within the registration burst rate window. When
this threshold is exceeded, the Net-Net SBC responds to new registration requests
with 503 Service Unavailable messages.
Default 0
Values Min: 0 / Max: 999999999
ping-in-service-response-codes—Enter the response codes that keep a session
agent in service when they appear in its response to the Net-Net SBC’s ping request.