Installation guide

SESSION-AGENT>RATE-CONSTRAINTS CONFIGURATION ELEMENTS N-Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 219
Default None
Values SIP Response codes
out-service-response-codes—Enter the response codes that take a session agent
out of service when they appear in its response to the Net-Net SBC’s ping request
or any dialog-creating request.
Default None
Values SIP Response codes
manipulation-string—Enter a value to references the $HMR_STRING variable
used to populate SIP headers and elements using HMR
Notes N/A
Path session-agent is an element under the session-router path. The full path from the
topmost ACLI prompt is: configure terminal > session-router > session-agent.
Release First appearance: 1.0 / Most recent update: S-C6.1.0
RTC Status Supported
Notes This is a multiple instance configuration element.
session-agent>rate-constraints
The rate-constraints subelement for the session-agent configuration element
allows you to configure rate constraints for individual session agents, which can then
be applied to the SIP interface where you want them used.
Syntax rate-constraints <method | max-inbound-burst-rate | max-outbound-
burst-rate | max-inbound-sustain-rate | max-outbound-sustain-rate
| select | no | show | done | exit>
Parameters method—Enter the SIP method name for the method you want to throttle
Values • NOTIFY
• OPTIONS
• MESSAGE
• PUBLISH
• REGISTER
max-inbound-burst-rate—For the SIP method you set in the method parameter,
enter the number to restrict the inbound burst rate on the SIP interface where you
apply these constraints.
Default 0
Values Min: 0 / Max: 999999999
max-outbound-burst-rate—For the SIP method you set in the method parameter,
enter the number to restrict the outbound burst rate on the SIP interface where you
apply these constraints.