Installation guide

220 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SESSION-AGENT-GROUP
Default 0
Values Min: 0 / Max: 999999999
max-inbound-sustain-rate—For the SIP method you set in the method
parameter, enter the number to restrict the inbound sustain rate on the SIP interface
where you apply these constraints
Default 0
Values Min: 0 / Max: 999999999
max-outbound-sustain-rate—For the SIP method you set in the method
parameter, enter the number to restrict the outbound sustain rate on the SIP
interface where you apply these constraints
Default 0
Values Min: 0 / Max: 999999999
Path session-agent> rate-constraints is an element of the session-router path. The full
path from the topmost ALCI prompt is: configure terminal > session-router >
session-agent > rate-constraints.
Release First appearance: 5.1.1
RTC Status Supported
session-agent-group
The session-agent-group element creates a group of Session Agents and/or groups
of other SAGs. The creation of a SAG indicates that its members are logically
equivalent and can be used interchangeably. This allows for the creation of
constructs like hunt groups for application servers or gateways.
Syntax session-group <group-name | description | state | app-protocol |
strategy | dest | trunk-group | sag-recursion | stop-sag-recurse
| select | no | show | done | exit>
Parameters group-name—Enter the name of the session-agent-group element. This required
entry must follow the Name Format, and it must be unique.
description—Describe the session agent group element
state—Enable or disable the session-agent-group element
Default enabled
Values enabled | disabled
app-protocol—Distinguish H.323 session agent groups from SIP session agent
groups
Default SIP
Values H323 | SIP