Installation guide

224 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SESSION-CONSTRAINTS>RATE-CONSTRAINTS
sustain-rate-window—Enter the time in seconds used to measure the sustained
rate
Default 0
Values Min: 0 / Max: 999999999
rate-constraints—Access the rate-constraints subelement
Path session-constraints is an element of the session-router path. The full path from
the topmost ACLI prompt is: configure terminal > session-router > session-
constraints.
Release First appearance: 4.1.1
RTC Status Supported
session-constraints>rate-constraints
The rate-constraints subelement for the session-constraints configuration
element allows you to configure rate constraints for individual session constraints,
which can then be applied to the SIP interface where you want them used.
Syntax rate-constraints <method | max-inbound-burst-rate | max-outbound-
burst-rate | max-inbound-sustain-rate | max-outbound-sustain-rate
| select | no | show | done | exit>
method—Enter the SIP method name for the method you want to throttle
Values • NOTIFY
• OPTIONS
• MESSAGE
• PUBLISH
• REGISTER
max-inbound-burst-rate—For the SIP method you set in the method parameter,
enter the number to restrict the inbound burst rate on the SIP interface where you
apply these constraints.
Default 0
Values Min: 0 / Max: 999999999
max-outbound-burst-rate—For the SIP method you set in the method parameter,
enter the number to restrict the outbound burst rate on the SIP interface where you
apply these constraints.
Default 0
Values Min: 0 / Max: 999999999
max-inbound-sustain-rate—For the SIP method you set in the method
parameter, enter the number to restrict the inbound sustain rate on the SIP interface
where you apply these constraints
Default 0
Values Min: 0 / Max: 999999999