Installation guide

230 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SIP-CONFIG
Values Min: 0 / Max: 999999999
max-timer—Enter the maximum retransmission timeout in milliseconds for SIP. In
RFC 3261, this value is also referred to as TIMER_T2.
Default 4000
Values Min: 0 / Max: 999999999
trans-expire—Enter the TTL1 in seconds for SIP transactions. This timer is
equivalent to TIMER_B in RFC 3261, and the same value is used for TIMER_D,
TIMER_F, TIMER_H, and TIMER_J as set out in the same RFC.
Default 32
Values Min: 0 / Max: 999999999
invite-expire—Enter the TTL in seconds for a SIP client transaction after receiving
a provisional response. This timer is equivalent to TIMER_C in RFC 3261.
Default 180
Values Min: 0 / Max: 999999999
inactive-dynamic-conn—Enter the time limit in seconds for inactive dynamic
connections
Default 32
Values Min: 1 / Max: 999999999
red-sip-port—Enter the port for sending or receiving SIP checkpoint messages.
Setting this to 0 disables SIP HA on the Net-Net SBC.
Default 1988
Values Min: 1024 / Max: 65535; 0
Notes This parameter is not RTC supported.
red-max-trans—Enter the size of the SIP signaling transaction list in entries stored
in memory
Default 10000
Values Min: 0 / Max: 999999999
Notes This parameter is not RTC supported.
red-sync-start-time—Enter the time in milliseconds before the HA Net-Net SBC
begins SIP signaling state checkpointing. As long as this HA Net-Net SBC is
healthy and active, it remains in a constant cycle of (re)setting this field’s timer and
checking to see if it has become standby.
Default 5000
Values Min: 0 / Max: 999999999
Notes This parameter is not RTC supported.