Installation guide

SIP-CONFIG CONFIGURATION ELEMENTS N-Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 231
red-sync-comp-time—Enter the time in milliseconds the standby Net-Net SBC
waits before checkpointing with the active Net-Net SBC to obtain the latest SIP
signaling transaction information once the initial checkpointing process is complete
Default 1000
Values Min: 0 / Max: 999999999
Notes This parameter is not RTC supported.
options—Enter customer-specific features and/or parameters. This optional field
allows for a comma separated list of “feature=<value>" or "feature" parameters for
the sip-config element.
sip-message-len—Set the size constraint in bytes on a SIP message
Default 4096
Values Min: 0 / Max: 65535
add-reason-header—Enable or disable adding the reason header for rfc 3326
support
Default disabled
Values enabled | disabled
enum-sag-match—Enable or disable matching this SAG’s group name to
hostname portions of ENUM NAPTR or LRT replacement URIs.
Default disabled
Values enabled | disabled
extra-method-stats—Enable or disable the expansion SIP Method tracking feature.
Default disabled
Values enabled | disabled
nsep-user-sessions-rate—Set the CPS for call rates on a per user basis for NSEP.
A value of 0 disables the call admission control on a per user basis.
Default 50
Values 0-999999999
rph-feature—Set the state of NSEP support for the global SIP configuration
Default disabled
Values enabled | disabled
enforcement-profile—Enter the name of the enforcement profile (SIP allowed
methods).
registration-cache-limit—Set the maximum number of SIP registrations that you
want to keep in the registration cache. A value means there is no limit on the
registration cache, therefore disabling this feature.
Default 0
Values Min: 0 / Max: 999999999
add-ucid-header—Enable or disable the using the UCID to correlate replicated SIP
message information when you use SRR.