Installation guide

232 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SIP-CONFIG
Default disabled
Values enabled | disabled
nsep-sa-sessions-rate—Enter maximum acceptable number of SIP INVITES
(NSEP sessions) per second to allow for SIP session agents. 0 means there is no limit.
Default 0
Values Min: 0 / Max: 999999999
register-use-to-for-lp—Enable or disable the use of an ENUM query to return the
SIP URI of the Registrar for a SIP REGISTER message for routing purposes
Default disabled
Values enabled | disabled
Path sip-config is an element under the session-router path. The full path from the
topmost ACLI prompt is: configure terminal > session-router > sip-config.
Release First appearance: 1.0 / Most recent update: S-C6.1.0
RTC Status Supported
Notes This is a single instance configuration element.