Installation guide

234 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SIP-FEATURE
require-mode-outbound—Select the treatment of feature (option tag) in a
Require header for an outbound packet
Default reject
Values • pass—B2BUA should include the tag in the corresponding outgoing
message
• reject—B2BUA should reject the request with a 420 (Bad Extension)
response. The option tag will be included in an Unsupported header in
the reject response.
proxy-require-mode-outbound—Select the treatment of feature (option tag) in a
Proxy-Require header for an outbound packet
Default pass
Values • pass—B2BUA should include the tag in the corresponding outgoing
message
• reject—B2BUA should reject the request with a 420 (Bad Extension)
response. The option tag will be included in an Unsupported header in
the reject response.
Path sip-feature is an element under the session-router path. The full path from the
topmost ACLI prompt is: configure terminal > session-router > sip-feature.
Release First appearance: 1.0 / Most recent update: 2.0
RTC Status Supported
Notes If an option tag is encountered that is not configured as a SIP feature, the default
treatments described in each of the field descriptions (name, support-mode,
require-mode, and proxy-require-mode) included in this section will apply.
Therefore, a sip-feature element only needs to be configured when non-default
treatment is required.
This is a multiple instance element.