Installation guide

SIP-INTERFACE CONFIGURATION ELEMENTS N-Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 235
sip-interface
The sip-interface element allows you to configure a SIP interface for your Net-Net
SBC.
Syntax sip-interface <state | realm-id | description | sip-ports |
carriers | proxy-mode | redirect-action | contact-mode | nat-
traversal | nat-interval | registration-caching | min-reg-expire
| registration-interval | route-to-registrar | teluri-scheme |
uri-fqdn-domain | options | trust-mode | max-nat-interval | nat-
int-increment | nat-test-increment | sip-dynamic-hnt | stop-
recurse | port-map-start | port-map-end | in-manipulationid |
out-manipulationid | sip-ims-feature | operator-identifier |
anonymous-priority | network-id | ext-policy-server | default-
location-string | term-tgrp-mode | charging-vector-mode |
charging-function-address-mode | ccf-address | ecf-address |
secured-network | max-incoming-conns | per-scr-ip-max-incoming-
conns | inactive-conn-timeout | implicit-service-route | rfc2833-
payload | rfc2833-mode | trans-expire | invite-expire | tcp-nat-
interval | constraint-name | response-map | local-response-map |
max-redirect-contacts | untrusted-conn-timeout | enforcement-
profile | refer-call-transfer | route-unauthorized-calls | tcp-
keepalive | add-sdp-invite | add-sdp-profiles | ims-aka-feature |
select | no | show | done | exit>
Parameters state—Enable or disable the SIP interface
Default enabled
Values enabled | disabled
realm-id—Enter the name of the realm to which the SIP interface applies
description—Provide a brief description of the sip-interface configuration
element
sip-ports—Access the sip-ports subelement
carriers—Enter a list of carriers related to the sip-config. Entries in this field must
follow the Carrier Format.
proxy-mode—Set the default SIP request proxy mode
Values • proxy—Forward all SIP requests to other session agents
• redirect—Send a SIP 3xx redirect response with contacts (found in the
local policy) to the previous hop
• record-route—Forward requests with Record-Route (for stateless and
transaction and operation modes only)
redirect-action—Set handling of Redirect (3xx) response messages from a session
agent
Values • Proxy—Send the response back to the previous hop
• Recurse—Recurse on the contacts in the response