Installation guide

238 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SIP-INTERFACE
Values Min: 1025 / Max: 65535
in-manipulationid—Enter the name of the SIP header manipulations
configuration to apply to the traffic entering the Net-Net SBC via this SIP interface
out-manipulationid—Enter the name of the SIP header manipulations
configuration to apply to the traffic exiting the Net-Net SBC via this SIP interface
sip-ims-feature—Enable or disable IMS functionality on this SIP interface
Default disabled
Values enabled | disabled
operator-identifier—Set the operator identifier value to be inserted into a P-
Charging-Vector header. The direction of the call determines whether this value is
inserted into the orig-ioi or the term-ioi parameter in the P-Charging-Vector
header. This string value MUST begin with an alpha character.
anonymous-priority—Set the policy priority parameter for this SIP interface. It is
used to facilitate emergency sessions from unregistered endpoints. This value is
compared against a policy priority parameter in a local policy configuration
element.
Default none
Values • none
•normal
•non-urgent
•urgent
•emergency
network-id—Set the value that will be inserted into the P-Visited-Network-ID
header
ext-policy-server—Enter the name of external policy server used as the CLF for
this SIP interface
default-location-string—Set a default location string to insert into P-Access-
Network-Info header when the CLF does not return this value
term-tgrp-mode—Select the mode for routing for terminating trunk group URIs
Default none
Values • none—Disable routing based on trunk groups
• iptel—Use trunk group URI routing based on the IPTEL formats
• egress-uri—Use trunk group URI routing based on the egress URI
format
charging-vector-mode—Set the state of P-Charging-Vector header handling
Default pass
Values • none—Pass the P-Charging-Vector header received in an incoming
SIP message untouched as the message is forwarded out of the Net-
Net SBC, not extracting RADIUS information