Installation guide

SIP-INTERFACE CONFIGURATION ELEMENTS N-Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 241
Default 0
Values Min: 0 / Max: 999999999
tcp-nat-interval—Enter the TCP NAT traversal registration interval in seconds
Default 90
Values Min: 0 / Max: 999999999
constraint-name—Enter the name of the constraint being applied to this interface
response-map—Enter the name of the response map being applied to this interface
local-response-map—Enter the name of the local response map being applied to
this interface
max-redirect-contacts—Enter the maximum number of contact and route attempts
in case of a redirect
Default 0
Values Min: 0 / Max: 10
untrusted-conn-timeout—Enter the timeout time, in seconds, for untrusted
endpoints on TCP/TLS connections
Default 0
Values Min: 0 (disabled) / Max: 999999999
enforcement-profile—Enter the name of the enforcement profile associated with
this SIP interface
refer-call-transfer—Enable or disable the refer call transfer feature.
Default disabled
Values enabled | disabled
route-unauthorized-calls—Enter the name of the SA or SAG you want to route
unauthorized calls
tcp-keepalive—Enable or disable standard keepalive probes to determine whether
or not connectivity with a remote peer is lost.
Default none
Values none | enabled | disabled
add-sdp-invite—Enable or disable this SIP interface inserting an SDP into either an
INVITE or a REINVITE
Default disabled
Values • disabled—Do not insert an SDP
• invite—Insert an SDP in the invite
• reinvite—Insert an SDP in the reinvite
add-sdp-profile—Enter a list of one or more media profile configurations you want
to use when the Net-Net SBC inserts SDP into incoming INVITEs that have no SDP.
The media profile contains media information the Net-Net SBC inserts in outgoing
INVITE.
ims-aka-feature—Enable or disable IMS-AKA use for a SIP interface
Default disabled