Installation guide

242 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SIP-INTERFACE > SIP-PORTS
Values enabled | disabled
Path sip-interface is an element under the session-router path. The full path from the
topmost ACLI prompt is: configure terminal > session-router > sip-interface.
Release First appearance: 1.0 / Most recent update: 4.1
RTC Status Supported
Notes This is a multiple instance configuration element.
sip-interface > sip-ports
The sip-ports subelement indicates the ports on which the SIP proxy or B2BUA will
listen for connections.
Syntax sip-ports <address | port | transport-protocol | tls-profile |
anonymous-connection | ims-aka-profile | select | no | show | done
| exit>
Parameters address—Enter the IP address of the host associated with the sip-port entry.
port—Enter the port number for this sip-port
Default 5060
Values Min: 1025 / Max: 65535
transport-protocol—Select the transport protocol associated for this sip-port
Default UDP
Values • TCP
•UDP
•TLS
•SCTP
tls-profile—Enter the TLS profile name
allow-anonymous—Select the type of anonymous connection from session agents
allowed
Default all
Values • all—Allow all anonymous connections
• agents-only—Only requests from session agents allowed
• realm-prefix—Session agents and address matching realm prefix
• registered—Session agents and registered endpoints (REGISTER
allowed from any endpoint)
• register-prefix—All connects from SAs that match agents-only, realm-
prefix, and registered agents
ims-aka-profile—Enter the name value for the IMS-AKA profile configuration to
use for a SIP port