Installation guide

244 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SIP-MANIPULATION
sip-manipulation
The sip-manipulation feature lets the Net-Net SBC add, modify, and delete SIP
headers and SIP header elements.
Syntax sip-manipulation <name | header-rules | description | select | no
| show | done | exit>
Parameters name—Enter the name of this list of header rules
header-rules—Access the header rules subelement
description—Describe what the set of header rules is doing
Path sip-manipulation is an element under the session-router path. The full path from
the topmost ACLI prompt is: configure terminal > session-router > sip-
manipulation.
Release First appearance: 4.0
RTC Status Supported
sip-manipulation > header-rules
The header-rules subelement is used to define one action to perform on a given SIP
header.
Syntax header-rules <name | action | match-value | msg-type | methods |
element-rules | header-name | comparison-type | new-value |
select | no | show | done | exit>
Parameters name—Enter the name of the header to which this rule applies. This name must
match a header name.
action—Select the action you want applied to the header specified in the name
parameter
Default none
Values • add—Add a new header, if that header does not already exist
• delete—Delete the header, if it exists
• manipulate—Manipulate this header according to the element rules
configured
• store—Store this header
• none—Take no action
match-value—Enter the exact value to be matched. The action you specify is only
performed if the header value matches.
msg-type—Select the message type to which this header rule applies
Default any
Values • any—Both Requests and Reply messages