Installation guide

250 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SIP-Q850-MAP
sip-q850-map
The sip-q850-map configuration element is used to map SIP response codes to q850
cause codes.
Syntax sip-q850-map <entries | delete | edit | select | no | show | done
| exit>
Parameters entries—Enter the entries configuration subelement
delete—Delete a SIP to q850 mapping. Enter the SIP code.
edit—Edit a response map by number
Path sip-q850-map is an element under the session-router path. The full path from the
topmost ACLI prompt is: configure terminal > session-router > sip-q850-map.
Release First appearance: 4.0
RTC Status Supported
sip-q850-map > entries
The entries subelement is used to create the mapping of q850 cause to SIP reason
code.
Syntax entries <sip-status | q850-cause | q850-reason | select | no |
show | done | exit>
Parameters q850-cause—Enter the q850 cause code to map to a SIP reason code
sip-status—Enter the SIP response code that maps to this q850 cause code
Values Min: 100 / Max: 699
q850-reason—Describe text to accompany the mapped SIP response code
Path Entries is a subelement under the sip-q850-map configuration element, which is
located under the session-router path. The full path from the topmost ACLI prompt
is: configure terminal > session-router > sip-q850-map > entries.
Release First appearance: 4.0
RTC Status Supported