Installation guide

STATIC-FLOW CONFIGURATION ELEMENTS N-Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 253
identifier field entry in a realm-config. This is a required field. Entries in this field
must follow the Name Format.
description—Provide a brief description of the static-flow configuration element
in-source—Enter the incoming source IP address and port of packets to match for
static flow translation. IP address of 0.0.0.0 matches any source address. Port 0
matches packets received on any port. The port value has no impact on system
operation if either ICMP or ALL is the selected protocol. The in-source parameter
takes the format:
in-source <ip-address>[:<port>]
Default 0.0.0.0
Values Port: Min: 0 / Max: 65535
in-destination—Enter the incoming destination IP address and port of packets to
match for static-flow translation. An IP address of 0.0.0.0 matches any source
address. Port 0 matches packets received on any port. The port value has no impact
on system operation if either ICMP or ALL is the selected protocol. The in-source
parameter takes the format:
in-destination <ip-address>[:<port>]
Default 0.0.0.0
Values Port: Min: 0 / Max: 65535
out-realm-id—Enter the ingress realm or interface source of packets to match for
static flow translation. This in-realm-id field value must be a valid identifier for a
configured realm. This required entry must follow the Name Format.
out-source—Enter the outgoing source IP address and port of packets to translate
to for static flow translation. IP address of 0.0.0.0 translates to any source address.
Port 0 translates to packets sent on any port. The port value has no impact on
system operation if either ICMP or ALL is the selected protocol. The in-source
parameter takes the format:
out-source <ip-address>[:<port>]
Default 0.0.0.0
Values Port: Min: 0 / Max: 65535
out-destination—Enter the outgoing destination IP address and port of packets to
translate to for static-flow translation. An IP address of 0.0.0.0 matches any source
address. Port 0 translates to packets sent on any port. The port value has no impact
on system operation if either ICMP or ALL is the selected protocol. The in-source
parameter takes the format:
in-destination <ip-address>[:<port>]
Default 0.0.0.0
Values Port: Min: 0 / Max: 65535