Installation guide

256 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SURROGATE-AGENT
surrogate-agent
The surrogate-agent configuration element allows you to configure the Net-Net
SBC for surrogate registration. This feature lets the Net-Net SBC explicitly register
on behalf of Internet Protocol Branch Exchange (IP-PBX).
Syntax surrogate-agent <register-host | register-user | state | realm-id
| description | customer-host | customer-next-hop | register-
contact-host | register-contact-user | password | register-
expires | replace-contact | route-to-registrar | aor-count |
auth-user | count-start | options | select | no | show | done |
exit>
register-host—Enter the registrar’s hostname to be used in the Request-URI of the
REGISTER request
register-user—Enter the user portion of the Address of Record
state—Enable or disable this surrogate agent
Default enabled
Values enabled | disabled
realm-id—Enter the name of the realm where the surrogate agent resides
description—Describe the surrogate agent. This parameter is optional.
customer-host—Enter the domain or IP address of the IP-PBX, which is used to
determine whether it is different than the one used by the registrar. This parameter
is optional.
customer-next-hop—Enter the next hop to this surrogate agent
register-contact-host—Enter the hostname to be used in the Contact-URI sent in
the REGISTER request
register-contact-user—Enter the user part of the Contact-URI that the Net-Net
SBC generates
password—Enter the password to be used for this agent
register-expires—Enter the expire time in seconds to be used in the REGISTER
Default 600,000 (1 week)
Values Min: 0 / Max: 999999999
replace-contact—Specify whether the Net-Net SBC needs to replace the Contact in
the requests coming from the surrogate agent
Default disabled
Values enabled | disabled
route-to-registrar—Enable or disable requests coming from the surrogate agent
being routed to the registrar if they are not explicitly addressed to the Net-Net SBC
Default enabled