Installation guide

26 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
HOW TO USE THE ACLI WORKING WITH CONFIGURATION ELEMENTS
Deleting There are two methods of deleting configurations.
• You can delete the information for elements while you are still working with
them.
• You can delete all configuration information for a previously configured
element.
For either method, use the no command to clear configurations.
Only Multiple Instance Elements can be deleted from the system. Single Instance
Elements can not be deleted; they can only be edited.
Deleting while
Working with an
Element
While you are configuring an element for the Net-Net SBC, you may accidentally
enter incorrect information or make some other error. To correct these errors, use the
no command to clear the system of the information you have entered.
Deleting an Existing
Element
You can only delete configurations from within their ACLI path. Use the select
command to choose the configuration element you want to delete.
To delete an existing element:
1. Enter the ALCI path to the element you wish to delete.
2. Enter the no command. After you do so the key field prompt (e.g., <name:>)
appears with a list of the existing configured elements beneath it.
ACMEPACKET(media-profile)# no
<name>: <Enter>
1: PCMU
2: G723
3: G729
3. Enter the number corresponding to the element you wish to delete.
selection:3
4. To confirm the deletion, use the select command to view the list of remaining
elements.
ACMEPACKET(media-profile)# select
<name>: <Enter>
1: PCMU
2: G723