Installation guide

260 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SYSTEM-CONFIG
•notice
•info
• trace|
•debug
• detail
syslog-servers—Access the syslog-servers subelement
system-log-level—Set the system-wide log severity levels write to the system log
Default warning
Values • emergency
•critical
•major
• minor
•warning
•notice
•info
•trace
•debug
• detail
process-log-level—Set the default log level that processes running on the Net-Net
SBC start
Default notice
Values • emergency
•critical
•major
• minor
•warning
•notice
•info
•trace
•debug
• detail
process-log-ip-address—Enter the IP address of server where process log files are
stored. Entries must follow the IP Address Format. The default value of 0.0.0.0
causes log messages to be written to the local log file.
Default 0.0.0.0
process-log-port—Enter the port number associated with server IP address where
process log files are stored. The default value of 0 writes log messages to the local
log file.
Default 0
Values Min: 0; 1025 / Max: 65535
default-gateway—Enter the IP address of the gateway to use when IP traffic sent
by the Net-Net SBC is destined for a network other than one of the LANs on which
the 10/100 Ethernet interfaces could be. Entries must follow the IP Address Format.
A value of 0.0.0.0 indicates there is no default gateway.