Installation guide

262 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SYSTEM-CONFIG
exceptions—Select system tasks that have no impact on system health or cause the
system to restart. This field contains the name(s) of the task(s) surrounded by
quotation marks. If there are multiple entries, they should be listed within quotation
marks, with each entry separated by a <Space>.
telnet-timeout—Enter the time in seconds the Net-Net SBC waits when there is
no Telnet activity before an administrative telnet session is terminated. A value of 0
disables this functionality.
Default 0
Values Min: 0 / Max: 65535
console-timeout—Enter the time in seconds the Net-Net SBC waits when there is
no activity on an ACLI administrative session before it terminates the session. The
ACLI returns to the User Access Verification login sequence after it terminates a
console session. A value of 0 disables this functionality.
Default 0
Values Min: 0 / Max: 65535
link-redundancy-state—Enable or disable the link redundancy
Default disabled
Values enabled | disabled
collect—Accesses the collect subelement
cli-audit-trail—Enable or disable the ACLI command audit trail
Default enabled
Values enabled | disabled
source-routing—Enable or disable source routing egress HIP packets based on
source IP addresses
Default disabled
Values enabled | disabled
cli-more—Enable this parameter to have the ACLI “more” paging feature working
consistently across console, Telnet, or SSH sessions with the Net-Net SBC. When
this parameter is disabled, you must continue to set this feature on a per session
basis.
Default disabled
Values enabled | disabled
terminal-height—Set the Net-Net SBC terminal height when the more prompt
option is enabled
Default 24
Values Minimum: 5 / Maximum: 1000
debug-timeout—Enter the time, in seconds, you want to the Net-Net SBC to
timeout log levels for system processes set to debug using the ACLI notify and
debug commands. A value of 0 disables this parameter.
Default 0