Installation guide

SYSTEM-CONFIG>COLLECT CONFIGURATION ELEMENTS N-Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 263
Values Min: 0 / Max: 65535
trap-event-lifetime—Set this parameter to the number of days you want to keep
the information in the alarm synchronization table; 0 turns alarm synchronization
off
Default 0
Values Min: 0 / Max: 7
options—Enter any customer-specific features and/or parameters for this global
system configuration. This parameter is optional.
Notes Under the system-config element, options are not RTC supported.
Path system-config is an element under the system path. The full path from the
topmost ACLI prompt is: configure terminal > system > system-config.
Release First appearance: 1.0 / Most recent update: 5.1
RTC Status Supported
Notes This is a single instance configuration element.
system-config>collect
The collect configuration element allows you to configure general collection
commands for data collection on the Net-Net SBC.
Syntax collect <boot-state | sample-interval | push-interval | start-
time | end-time | red-collect-state | red-max-trans | red-sync-
start-time | red-sync-comp-time | push-receiver | group-settings
| push-success-trap-state | select | no | show | done | exit>
Parameters sample-interval—Enter the data collection sampling interval, in minutes
Default 0
Values Min: 1 / Max: 120
push-interval—Enter the data collecting push interval, in minutes
Default 0
Values Min: 0 / Max: 120
start-time—Enter the date and time to start data collection. Enter in the form of:
yyyy-mm-dd-hh:mm:ss (y=year; m=month; d=day; h=hours; m-minutes;
s=seconds)
Default now
end-time—Enter the date and time to stop data collection. Enter in the form of:
yyyy-mm-dd-hh:mm:ss (y=year; m=month; d=day; h=hours; m-minutes;
s=seconds)
Default never
boot-state—Enable or disable group collection on reboot