Installation guide

266 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z SYSTEM-CONFIG > SYSLOG-SERVERS
•voltage
•fan
• temperature
• sip-sessions
• sip-ACL-oper
• sip-ACL-status
• sip-client
• sip-server
• sip-policy
• sip-errors
• sip-status
• algd-state
•mgcp-trans
• mgcp-media-events
•mgcp-ACL
• algd-ACL
• h323-stats
sample-interval—Enter the group data collection sampling interval, in minutes
Default 0
Values Min: 0 / Max: 120
start-time—Enter the date and time to start group data collection. Enter in the form
of: yyyy-mm-dd-hh:mm:ss (y=year; m=month; d=day; h=hour; m=minute;
s=second)
end-time—Enter the date and time to stop group data collection. Enter in the form
of: yyyy-mm-dd-hh:mm:ss (y=year; m=month; d=day; h=hour; m=minute;
s=second)
boot-state—Enable or disable data collection for this group.
Default disabled
Values enabled | disabled
Path group-settings is a subelement of the system-config>collect subelement. The full
path from the topmost ACLI prompt is: configure terminal > system > system-
config > collect > group-settings.
Release First appearance: 5.0
RTC Status Supported
system-config > syslog-servers
The syslog-servers subelement configures multiple syslog servers.
Syntax syslog-servers <address | port | facility | select | no | show |
done | exit>
Parameters address—Enter the syslog server’s IP address
port—Enter the port number on the syslog server that the Net-Net SBC sends log
Default 514