Installation guide

268 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z TEST-TRANSLATION
from-address—Enter the “from” address of the local policy to look up/test. From
addresses should be entered as SIP-URLs in the form of
sip:[e-mail].
to-address—Enter the “to” address of the local policy to look up/test. To addresses
should be entered as SIP-URLs in the form of
sip:[e-mail].
time-of-day—Enable or disable use of the time of day value set in the start-time
and end-time fields you set in configured local-policy elements
Values enabled | disabled
carriers—Enter the names of permitted carriers set in the carriers fields set in
configured local-policy elements. This field is formatted as a list of comma-
separated text strings enclosed in quotation marks.
media-profile—Enter a list of media profiles
show—Show the next hop and the associated carrier information for all routes
matching the “from” and “to” addresses entered
Path Ty p e test-policy at the topmost ACLI prompt.
Release First appearance: 1.0 / Most recent update: 1.2.1
RTC Status Supported
Notes Type the show command to perform the actual test lookup after parameters have
been entered.
The test-policy element can also be configured in Superuser mode as a command.
test-translation
The test-translation element tests translation rules configured for the Address
Translation feature.
Syntax test-translation <called-address | calling-address | translation-
id | exit | show>
Parameters called-address—Enter the address on which the called rules will be applied. This
entry is required.
calling-address—Enter the address on which the calling rules will be applied. This
entry is required.
translation-id—Enter the translation rules to test. This entry is required.
show—Show results of translation
Path Ty p e test-translation at the topmost ACLI prompt.
Release First appearance: 1.3
RTC Status Supported.