Installation guide
270 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
CONFIGURATION ELEMENTS N-Z TRANSLATION-RULES
Default 10
Values Min: 0 / Max: 10
mutual-authenticate—Enable or disable mutual authentication on the Net-Net
SBC
Default disabled
Values enabled | disabled
tls-version—Enter the TLS version you want to use with this TLS profile
Default compatability
Values TLSv1 | SSLv3 | compatability
Mode Superuser
Path tls-profile is an element under the security path. The full path from the topmost
prompt is: configure terminal > security > tls-profile.
Release First appearance: 4.1; Most recent update S-C6.1.0
RTC Status Supported
translation-rules
The translation-rules element creates unique sets of translation rules to apply to
calling and called party numbers. The fields within this element specify the type of
translation to be performed, the addition for deletion to be made, and where in the
address that change should be made.
Syntax translation-rules <id | type | add-string | add-index | delete-
string | delete-index | select | no | show | done | exit>
Parameters id—Enter the identifier or name for this translation rule. This field is required.
type—Select the address translation type to be performed
Default none
Values • add—Adds a character or string of characters to the address
• delete—Deletes a character or string of characters from the address
• replace—Replaces a character or string of characters within the address
• none—Translation rule is disabled
add-string—Enter the string to be added during address translation to the original
address. The value in this field should always be a real value; i.e., this field should
not be populated with at-signs (@) or dollar-signs ($).
When the type is set to replace, this field is used in conjunction with the delete-
string value. The value specified in the delete-string field is deleted and the value
specified in the add-string field is inserted. If no value is specified in the delete-
string field and the type field is set to replace, then nothing will be inserted into the
address.