Installation guide

Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 35
2 ACLI Commands A - M
acl-show
The acl-show command shows a list of denied ACL entries.
Syntax acl-show
Mode Superuser
Release First appearance: 2.0
Notes The acl-show command displays a list of the following denied ACL entries:
• Incoming port, slot, and VLAN tag
• Source IP, bit mask, port, and port mask
• Destination IP address and port
• Protocol
• ACL entry as static or dynamic
• ACL entry index
Example ACMEPACKET# acl-show
acquire-config
The acquire-config command retrieves the configuration from one Net-Net SBC for
configuration checkpointing an HA node.
Syntax acquire-config <IPAddress>
Arguments <IPAddress> Enter the IP address of Net-Net SBC to acquire configuration
from
Mode Superuser
Release First appearance: 1.2.1 / Most recent update: 2.0
Notes This command forces one Net-Net SBC in an HA node to learn the configuration
from the other system. If configuration checkpointing is already running, the
acquire-config command has no effect.
Only after the acquire-config command is executed and the Net-Net SBC is
rebooted will process of acquiring the configuration be complete. In Net-Net SBC
Software 2.0, only type
acquire-config <wancom0-IP address>.
Example ACMEPACKET# acquire-config 1.1.0.1