Installation guide

36 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
ACLI COMMANDS A - M ACTIVATE-CONFIG
activate-config
The activate-config command activates the current configuration on the Net-Net
SBC to make it the running configuration.
Syntax activate-config
Mode Superuser
Release First appearance: 1.2.1
Notes Before executing this command, be aware of the real time configuration (RTC)
consequences on the operation of the Net-Net SBC.
To use RTC, the activate-config command is executed to alert the Net-Net SBC
that the current configuration has changed and that it needs reload configuration
information.
Example ACMEPACKET# activate-config
archives
The archives command is used for creating, moving, and manipulating archived log
files. All archive files are created in .tar.gz format in SD Software versions 2.0 and
above. All commands are executed from within the archives menu.
Log files contain a record of system events. Log files are stored in the /code/logs
directory. The CFG archive type is no longer supported in C6.0.0. When an archive
command is entered with the CFG type, the Net-Net SBC responds with an error
message.
Path Ty p e archives at the topmost prompt before executing any of the below commands
to enter the archives shell.
Release First appearance: 1.1 / Most recent update: 2.0
archives > create
Syntax create LOGS <logfile-name>
Arguments <logfile-name> Enter the name of archive file that contains all logs
To create an archive file of a log, type create LOGS and enter a logfile name.
Archives are created in .tar.gz (tarred and gzipped) format.
Example ACMEPACKET(archives)# create LOGS jun_30.gz