Installation guide

38 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
ACLI COMMANDS A - M ARP-ADD
<password> Enter the password on remote host
Notes This command retrieves an archived log. If you do not include all the necessary
arguments, the get command will prompt you for the arguments you omitted.
The get command writes the retrieved file to the /code/logs/<archive-name> path.
Example ACMEPACKET(archives)# get LOGS may_31.gz
archives > rename
Syntax rename LOGS <old-archive> <new-archive>
Arguments <current_name> Enter the old archive name
<new_name> Enter the new archive name
Notes Renames an archived log. You do not need to append “.tar.gz” to the filename
when using this command.
Example ACMEPACKET(archives)# rename LOGS june sept
archives > send
Syntax send LOGS <archive-name> <host-ip-address> <username>
Arguments <archive-name> Enter the name of archive file to send
<host-ip-address> Enter the IP address of FTP server
<username> Enter the FTP username on server
Notes This command sends an archived log file to a remote host using FTP. If you do not
include all the necessary arguments, the send command will prompt you for the
arguments you omitted.
Example ACMEPACKET(archives)# send LOGS Oct_24.gz 1.0.100.7 user1
arp-add
The arp-add command manually adds ARP entries for media interfaces to the ARP
table.
Syntax arp-add <slot> <port> <vlan ID> <ip-address> <mac-address>