Installation guide

DELETE-STATUS-FILE ACLI COMMANDS A - M
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 47
Mode Superuser
Release First appearance: 1.1 / Most recent update: 2.0
Example ACMEPACKET# delete-config
Notes When the delete-config command is entered, the system gives the warning asking
if you really want to erase either the current config or the current cached config.
Enter a
y to complete the deletion.
delete-status-file
The delete-status-file deletes the reboot status file.
Syntax delete-status-file
Mode Superuser
Release First appearance: 1.1 / Most recent update: 1.3
Notes This command deletes the /code/statsDump.dat file which retains all system
data if the Net-Net SBC has to reboot. This command also removes the contents of
the
/code/taskCheckDump.dat file which contains system failure information.
Example ACMEPACKET# delete-status-file
display-alarms
The display-alarms command displays details about the specific alarms on the Net-
Net SBC.
Syntax display-alarms
Mode User
Release First appearance: 1.0
Notes This command shows the current alarms on the Net-Net SBC. Each alarm entry
lists alarm ID, task ID, alarm severity code, number of occurrences, when the alarm
first and last occurred, the number of times it has occurred, and a description of the
alarm.
Example ACMEPACKET# display-alarms
display-backups
The display-backups command displays the configuration backup files located in
the /code/bkups directory.
Syntax display-backups [sort-by-name]