Installation guide

LOAD IMAGE ACLI COMMANDS A - M
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 51
Syntax kill <id>
Arguments <id> Enter the id of the Telnet session you want to terminate
Mode Superuser
Release First appearance: 2.0
Notes You can use the show users command to view all active Telnet sessions and the
index number associated with each session. You cannot use this command to
terminate SSH or console sessions.
Example ACMEPACKET# kill 11
load image
The load image command guides users through the upgrade process, thereby
keeping errors to a minimum.
Syntax load image <IP address> <filename> <username>
Arguments <IP address> Enter the IP address of the remote host
<filename> Enter the remote filename with path
<username> Enter the username for the remote host
Mode Superuser
Release First appearance: 5.1.1
Example ACMEPACKET# load image 192.30.8.50 /image/nnC511p4.gz user
Notes You can either enter these arguments all in one line (with a <Space> between each),
or you can press <Enter> after each entry to move to the next piece of information
required to load the new information.
Once you have entered all of the required information, you will be prompted for the
password for the remote host and the image loading process starts.
log-level
The log-level command sets the system wide log-level or the log-level for a specific
task or process. In addition, you can set the log type for a specific log level on a per-
task basis.
Syntax log-level system <log-level>
log-level <task-name | “all”> <log-level>
Arguments <log-level> Select the log level either by name or by number