Installation guide

NOTIFY ACLI COMMANDS N - Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 57
Example ACMEPACKET# notify radd reload
notify sipd
Syntax notify sipd <arguments>
Arguments <arguments> The following are arguments for this command:
Values • reload—Update configuration changes dynamically by
reloading the configuration data that SIP functionality might
need. This command cannot tear down any in-progress
sessions, and it cannot tear down any listening sockets.
• nosiplog—Disable the logging of SIP messages, including
SIP messages as seen from the perspective of the Net-Net
SBC’s SIP proxy
• siplog—Enable SIP logging messages in the sipmsg.log
• report—Write all SIP process statistics to the log file
• dump limit—Write CPU limit information to the log file
• debug—Set log level for SIP protocol for some SIP activity
• nodebug —Disable setting the log level for the SIP protocol
for some SIP activity
Example ACMEPACKET# notify sipd nosiplog
notify syslog
Syntax notify syslog <arguments>
Arguments <arguments> Arguments for this command
Values • ip-address—Add a syslog server with the given IP address to
the configured syslog servers. When this command is
executed without any arguments, the Net-Net SBC is
prompted to re-read the current configuration, replace any
pre-existing configuration information for syslog, and begin
sending syslog messages to any configured syslog servers.
• udplog
• noudplog
• trace
• notrace
Example ACMEPACKET# notify syslog 100.1.0.20