Installation guide

PACKET-CAPTURE ACLI COMMANDS N - Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 59
packet-capture
The packet-capture command captures and views packets from a designated
interface.
Syntax packet-capture <state> <slot> <port>
Arguments <state> Select the state of packet capturing on the slot and port pair
Values • enabled—Enable packet capturing
• disabled—Disable packet capturing
<slot> Select the media interface slot
Values • 0—Left slot
• 1—Right slot
<port> Select the media interface port
Values • 0—Leftmost port
• 1—Second from left port
• 2—Third from left port (not applicable for GigE cards)
• 3—Rightmost port (not applicable for GigE cards)
Example ACMEPACKET# packet-capture enabled 0 1
packet-capture clear
Syntax packet-capture clear
Empty the packet buffer of captured packets
Example ACMEPACKET# packet-capture clear
packet-capture modify
Syntax packet-capture modify <integer> <y [es] | n [o]>
Arguments <integer> Enter the number of packets to show in the buffer
Default 100
Values Min: 0 / Max: 1000
<y[es] | n[o]> Signify whether the packet buffer wraps when full