Installation guide

60 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
ACLI COMMANDS N - Z PACKET-TRACE
Default n
Values y[es] | n [o]
Example ACMEPACKET# packet-capture modify 50 y
packet-capture show
Syntax packet-capture show
Notes Displays a summary of the most recently captured packets on the screen
Example ACMEPACKET# packet-capture show
packet-capture detail
Syntax packet-capture detail <integer>
Arguments <integer> Identify the packet number to view
Mode Superuser
Release First appearance: 1.0 / Most recent update: 1.2.1
Example ACMEPACKET# packet-capture detail 100
packet-trace
The packet-trace-start command starts packet tracing on the Net-Net SBC. Once
the trace is initiated, the Net-Net SBC duplicates all packets sent to and from the
endpoint identified by the IP address that are sent or received on the specified Net-
Net SBC network interface.
Syntax packet-trace <start> <stop>
Arguments <start> Start packet-tracing on the Net-Net SBC. Once the trace is
initiated, the Net-Net SBC duplicates all packets sent to and from the endpoint
identified by the IP address that are sent or received on the specified Net-Net SBC
network interface.
• network-interface—The name of the network interface on the
Net-Net SBC from which you want to trace packets; this value
can be entered as either a name alone or as a name and subport
identifier value (name:subportid)
• ip-address—IP address of the endpoint to and from which the
Net-Net SBC will mirror calls