Installation guide

REALM-SPECIFICS ACLI COMMANDS N - Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 63
Release First appearance: 5.0
Example ACMEPACKET# prompt-enabled disabled
realm-specifics
The realm-specifics command displays all configuration elements that have a
specified realm ID configured.
Syntax realm-specifics <realm-ID>
Arguments <realm-ID> Enter the name of realm
Mode User
Release First appearance: 2.0
Notes If a specified realm-ID appears as a configuration parameter in any configuration
element, that full element is displayed on the screen. The realm-specifics
command acts as a “grep” command for a realm name that appears in any
configuration element.
Example ACMEPACKET# realm-specifics test1
reboot
The reboot command reboots the Net-Net SBC.
Syntax reboot <arguments>
Arguments <arguments> The following are arguments for this command:
Values • force—Reboot the Net-Net SBC system using the last
running configuration. The confirmation prompt is bypassed
when using this command.
• activate—Reboot the Net-Net SBC system using the last-
saved configuration. You are presented with a confirmation
prompt when using this command.
• no argument—Reboot the Net-Net SBC system using the
last running configuration
Mode Superuser
Release First appearance: 1.0 / Most recent update: 1.2.1
Example ACMEPACKET# reboot activate