Installation guide

SAVE-CONFIG ACLI COMMANDS N - Z
Version S-C6.1.0 Oracle Communications Session Border Controller ACLI Reference Guide 67
<running> Restore the configuration to the last running configuration.
This is an optional argument.
Mode Superuser
Release First appearance: 1.0
Notes Use the display-backups command to view the backups that are available to be
restored.
Example ACMEPACKET# restore-backup-config FEB_07.gz saved
save-config
The save-config command saves the current configuration to the Net-Net SBC’s
last-saved configuration, stored in flash memory.
Syntax save-config
Mode Superuser
Release First appearance: 1.0 / Most recent update: 1.2.1
Notes When this command is executed and resources are sufficient, the Net-Net SBC
notifies you that the configuration has been saved successfully and the current
configuration number will be incremented by one.
Example ACMEPACKET# save-config
secret
The secret command sets the User and Superuser passwords.
Syntax secret <user level>
Arguments <user level> Each user level argument is listed and explained below.
Values • login—Set the Net-Net SBC’s user password
• enable—Set the Net-Net SBC’s superuser password
• backup—Set the backup password
• config—Set the configuration password
Mode Superuser
Release First appearance: 1.0
Notes For security reasons, the ACLI does not echo the password information you enter.
You will be prompted to enter the new password twice for both commands. The
passwords must be 6-8 characters including one non-alpha character. For security
purposes, please use different passwords for the user and superuser accounts.
We recommend that you do not change the default User and Superuser passwords
on Net-Net SBCs in your lab and testing facilities.