Installation guide

84 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
ACLI COMMANDS N - Z SHOW
–Flow-Released—Number of hairpined/spiraled flows
released back into the original realm (when mm-in-realm or
mm-in-network is disabled)
–MSM-Release—Number of flows that have been released as
part of the SIP distributed (multi-system) release feature
–NAT Entries—Number of NAT table entries in the CAM
established by MBCD for its flows. The NAT table can be
viewed with the show nat commands.
–Free Ports—Number of ports available from configured
steering pools
–Used Ports—Number of ports allocated to flows
–Port Sorts—Number of times the free ports list had to be
sorted because consecutive ports (for RTP & RTCP) could not
be found
–MBC Trans—Number of MBC transactions currently in
progress
–MBC Ignored—Number of requests ignored because it is in
standby mode in an HA configuration
–ARP Trans—Number of ARP Transactions. In some cases,
MBCD must obtain the MAC address of the destination of a
flow before an entry can be added to the NAT table. This
statistic shows the number of outstanding ARP requests for
MBCD flows.
• nat—Display statistics about MBCD's usage of the NAT
Table and flow guard timer events. The following is a list of all
MBCD NAT statistics:
–Adds—Number of times an entry was added to the NAT
table
–Deletes—Number of times an entry was removed from the
NAT table
–Updates—Number of times a NAT table entry was updated,
including updates due to the "latching" event when the first
packet for a flow is received
–Non-Starts—Number of initial flow guard timeouts (i.e.
number of times a packet was never received for a NAT table
entry)
–Stops—Number of subsequent flow guard timeouts (i.e.
number of times that packets stopped for a NAT table entry)
–Timeouts—Number of total session limit timeouts (i.e.
number of times the session limit for a flow was exceeded)
• acls—Display MBCD Access Control statistics, starting with
a time stamp showing when the current period began. The
following is a list of each entry count:
The following ACL statistics are shown for the Period and Lifetime
monitoring spans:
–Static Trusted
–Static Blocked