Installation guide

90 Oracle Communications Session Border Controller ACLI Reference Guide Version S-C6.1.0
ACLI COMMANDS N - Z SHOW
–Ports Used—Number of ports used
–Free Ports—Number of free ports
–No Ports Avail—Number of times no steering ports were
available
–Ingress Band—Amount of bandwidth used for inbound
flows
–Egress Band—Amount of bandwidth used for outbound
flows
–BW Allocations—Number of times that bandwidth was
allocated
–Band Not Avail—Number of times a session was rejected
due to insufficient bandwidth
• redundancy—Display the equivalent of the show
redundancy mbcd command
• all—Display information related to many of the show mbcd
subcommands. Only those MBC messages for which there are
statistics are shown. Rather than entering the individual
subcommands, all information is displayed for the following:
–MBC status
–NAT entries
–MBC errors
–MBC messages including: add, modify, subtract, notify, and
other
• stun—Display STUN server statistics
–Servers—The number of STUN servers (the same as the
number of realms configured with a STUN server).
–Server Ports—Number of ports per STUN server; there will
be four ports per STUN server.
–Binding Requests—Number of STUN Binding Request
messages received by all STUN servers.
–Binding Responses—Number of STUN Binding Response
messages sent by all STUN servers.
–Binding Errors—Number of STUN Binding Error messages
sent by all STUN servers.
–Messages Dropped—Number of messages dropped by all
STUN servers.
Example ACMEPACKET# show mbcd errors
show media
Syntax show media <media-stats> <slot> <port> <vlan>