User manual

www.ACME-online.de
ACME the game company
.
Inserting the battery
Switch on the controller. The Power LED starts flashing. Pull down the gas stick (left).
Once the battery is fully charged, you can insert it inside the housing of the zoopa Q mantis.
Dismount the screw of the battery housing and pull back the cover.
Check the polarity of the battery before you connect it!
Insert the battery inside the housing and store the cables carefully. Remount the cover. The LEDs of
the model start to flash.
Always switch on the controller before you connect the battery!
Always disconnect the battery from the model before you switch off the controller.
Controller and model are already paired out of the box.
Beginner, Advanced and Professional mode
You can choose between beginner and professional mode in 3 steps. The model flies with lower speed
in beginner mode. This helps you to carefully check all controls. When choosing the 2 additional
modes, the model will fly faster and more agile.
To change the modes, press the left button on the top of controller while the model is already
activated
.
A beep- sound will confirm the setting.
1 - Beginner (70% scale deflection/ motor power)
2 - Advanced (85% scale deflection / motor power)
3 - Professional (100% full deflection / motor power)