User manual

37
Controls


Please perform the following settings on the controller (Mode2 = Gas left):
Left stick > center Upper left switch > 0
Right stick > center Upper right switch > 0

Controller (Mode 2)
Model
（ front）
Action

The left stick (front / back) of the
controller controls the motor speed and
thus the ascent and descent of the
model. In the center, the model holds the
current altitude.

Yaw
The left stick (left or right) turns the
model around the vertical axis.
-Stick to the left
> Counterclockwise yaw
- Stick to the right
> Clockwise yaw

Roll / Nick
Through the right strick, the roll axis of
the quadrocopter is addressed. For a
forward / backward movement (pitch)
move the stick forward / back.
 In GPS mode, the copter will hold the
position when you release this stick.
Fixed height Fixed point Auto Home
To activate a function on the right side,
note that the left switch is set to 0 =
Fixed height.
L0 + R0: Starting without GPS
L0 + R1: GPS-supported fly
L0 + R2: Return to start point
(Only with full GPS support)
Fixed height Evo Mode Home
Lock
To activate a function on the left, the
right switch has to be set to 0=Fixed
height.
L0 + R0: Starting without GPS
L1 + R0: No Descent
L2 + R0: Startpoint-orientated flight