Installation guide

STEP
2
STEP
3
STEP
5
STEP
4
STEP
7
STEP
6
INSTALLING THE IRIS X (Continued)
* The camera can be adjusted by using the Camera Adjust/Privacy Wheel on
the back of the IRIS X.
Observe your IRIS X as it begins
the initial setup process
Setup Complete
Your IRIS X is ready to use
once the phone number is
displayed in solid green in
the top right corner.
Note: Remove plastic
protective covering from the
front of the camera* and
IRIS X Video Phone screen.
Connect the cord of the
Handset by plugging it into the
port on the back of the IRIS X
Connect the other end of the
Ethernet Cable to an open port
on your Router
Connect the Ethernet Cable to
the Network Port on the back
of your IRIS X
Plug the Power Adapter into
the IRIS X and an electrical
outlet
Ethernet Cable
shortened for clarity.
Ethernet Cable
shortened for clarity.
Main Screen
Your IRIS X will begin the initial setup process during which you
will see an animation sequence. The IRIS X may also turn itself
o and on as it registers with the ACN network.
IMPORTANT: The setup process may take up to 15 minutes.
Please do not touch the screen or unplug the video phone
until the 10 digit telephone number and icon turns green
(shown in STEP 7).