User manual

ACN IRIS 3000 VIDEO PHONE USER MANUAL

3-6-1-1. Network

The Network settings of your video phone are pre-set to allow calls through the Internet.

Select “Settings” in the Main Menu

and Press OK

Select “System Settings” in the

Settings Menu and Press OK

System Settings Menu Select “Network” from menu

and Press OK

PLEASE DO NOT ATTEMPT TO ADJUST ITEMS IN THE NETWORK MENUS. PLEASE CONTACT ACN TECHNICAL SUPPORT FOR

ASSISTANCE – 888-414-1958 (U.S.) or 866-913-3445 (Canada).

3-6-1-2. Factory Reset

You can reset your video phone to pre-set Factory Settings. If your video phone is initialized, all congurations you previously saved are deleted.

Select “Settings” in the Main Menu

and Press OK

Select “System Settings” in the

Settings Menu and Press OK

System Settings Menu Select “Factory Reset” from menu

and Press OK

PLEASE DO NOT ATTEMPT TO ADJUST ITEMS IN THE FACTORY RESET MENUS. PLEASE CONTACT ACN TECHNICAL SUPPORT FOR

ASSISTANCE – 888-414-1958 (U.S.) or 866-913-3445 (Canada).

3-6-1-3. Sound

You can select the sound settings for ringtones, sound eects and volume controls. You can use a default ringtone or customize your

own ringtones. Save your custom ringtones as MP3 or .wav les on your SD Card or USB drive and insert into phone.

Select “Settings” from the Main Menu

and Press OK

Select “Systems Settings” Menu

and Press OK

Select “Sound” in the System Settings

Menu and Press OK

Select “Ring Tone” and Press OK

Select a default ringtone or the de-

vice (SD or USB) where the ringtone

is stored.

Select the desired ringtone from the

list and press OK

Press BACK Select “Yes” and Press OK to save

Please note that the USB/SD device must stay plugged into the video phone for your customized ringtones to work.

Speaker Volume, Handset and Ringer Volume can also be adjusted from here. Changing Volume controls on this menu will remain for

every call.

Always press the BACK button to save and exit the menu. After each entry, you will see a screen asking you to verify your changes. Select

“Yes” or “No” and select OK to save your settings.