User manual

ManualsBrandsACN ManualsConsumer electronicsIRIS X

ACN IRIS 3000 VIDEO PHONE USER MANUAL

3-6-1-4. Display

You can setup the Display Output, LCD Brightness and Language.

Select “Settings” in the Main Menu

and Press OK

Select “System Settings” in the

Settings Menu and Press OK

Select the Menu and Press OK Select “Display” in the System Settings

Your video phone gives you the exibility to move your phone’s visual image to an external monitor. You can set the Video Output device

to activate this option. Always press the BACK button to save and exit the menu. After each entry, you will see a screen asking you to

verify your changes. Select “Yes” or “No” and select OK to save your settings.

Display Output LCD Brightness Language

Select “Display Output” choosing

between “LCD”, “TV Out (PAL)” and “TV

Out (NTSC)”. Use Video Output if you

wish to connect your video phone to

a TV or computer screen.

Use Navigation Arrows to adjust the

“LCD Brightness”. Use to adjust the

brightness of your screen.

Use Navigation Arrows to select the

language you prefer.

If your upload bandwidth is less than 200, please contact your ISP about higher speed service.

If your upload bandwidth is between 200 and 365, you should select an Upload bandwidth speed of 128.

If your upload bandwidth is between 366 and 531, you should select an Upload bandwidth speed of 256.

If your upload bandwidth is between 532 and 698, you should select an Upload bandwidth speed of 384.

If your upload bandwidth is greater than 699, you should select an Upload bandwidth speed of 512.

NOTE: You cannot change your display settings while on a call. You must make and save your selection prior to making calls. To see the eﬀects of the change, you’ll

need to place a call. The party you have called will be able to tell you if your picture is clearer. If you set the upload bandwidth speed too high, it will distort the quality of

picture. To adjust, simply reset your upload bandwidth speed to the next setting down.

3-6-1-5. Personal Options

You can set up Picture Capture, Self-View, Power Saving, Wallpaper, Digital Photo Frame On/O and Digital Photo Frame Delay from this menu.

Select “Settings” in the Main Menu

and Press OK

Select “Systems Settings” Menu

and Press OK

Select “Personal Options” in the

System Settings Menu and Press OK

Choose “Picture Capture”