User manual

ACN IRIS 3000 VIDEO PHONE USER MANUAL
20
Select the device where the stored
pictures are housed (either “SD” or
“USB”). Use to capture pictures while
on a call.
Highlight Self-View box and select
OK if you want to enable the self-
view option. Allows you to see what
the caller sees.
Use the Navigation Arrows to select
the amount of seconds (“30,” “60”’ or
“90”) before the video phone goes to
the Digital Photo Frame or to a black
screen.
Highlight Wallpaper and select OK if
you want to enable Wallpaper. Wall-
paper is the video phone background
displayed on you LCD screen. You
can choose a different wallpaper pat-
tern to be displayed from a SD card or
USB flash drive inserted in your video
phone. Note: The Wallpaper will not
work unless the Digital Photo Frame is
disabled.
Highlight Digital Photo Frame and
select OK if you want to enable the
Digital Photo Frame. Allows the
video phone to display random
pictures that are either stored on the
video phone or on a SD card or USB
flash drive.
Select the delay you wish in between
each Digital Photo Frame from 15, 20,
25 or 30 seconds.
3-6-1-6. Video
Upload Bandwidth Frame Rate
Upload Bandwidth is the capacity at
which the video phone can upload
data over your Internet connection.
The IRIS 3000 comes with pre-set
optimal factory settings. If the video
image you are sending is not as clear
as you would like, you can adjust the
upload bandwidth speed of your
video phone.
The Frame Rate is the speed at which
your video phone updates images.
You can select Low, Normal, or High
depending on your bandwidth
speed.
Video Codec
Video Codec represents the video compression on your phone. The IRIS 3000 uses two video codecs: H.263 and H.264. The Video Codec
will automatically adjust to the appropriate setting based on the upload bandwidth and frame rate selected.
3-6-2. Time Setting
Your video phone provides you with a world time function.
Select “Settings” in the Main Menu
and Press OK
Select “System Settings” in the
Settings Menu and Press OK
Select “Time Setting” in the
Settings menu and Press OK
Time Settings menu
DST (Daylight Saving Time) GMT (Greenwich Mean Time)
Select “On” to enable “Daylight
Saving Time” or “Off” to disable it.
Use the Navigation Arrows to select
the time zone for your area.